JTC0830B009L Customizable Coin Vibration Motor with FPC and Large Contact Pads

This coin vibration motor uses an FPC with large contact pads, usually connected to PCBA mounted pogo pins or spring contacts on the PCBA. The motor is installed close to the inner wall of the product casing, and there is 3M 467 double-sided tape on the rear of the motor for easy installation. If leads are required, wires can be soldered to these contact pads; however, the wires must be thin and flexible (UL3302 AWG 32/34) to prevent the adhesive holding the FPC to the metal base from separating and the FPC from lifting upward. If the FPC size or contact arrangement is not suitable for your application, we can manufacture custom flex circuits based on your design. Mold fees may apply.

Size (mm):Φ 8*3.0
Rated voltage(V):3.0V
Rated Current(mA):≤85mA
Rated speed(rpm):10000
Starting Voltage (V):≤2.3V

Request a Quote

PRODUCTS DETAILS

Mobile Devices: Ideal for smartphones and tablets, providing precise tactile feedback for notifications, calls and reminders.

Wearables: Ideal for fitness trackers, smartwatches and other wearable technology, providing effective and reliable vibration feedback.

Consumer Electronics: For use in game controllers, remote controls, and other small electronic devices that benefit from precise and reliable tactile feedback.

Medical Devices: For compact medical devices that require accurate and long-lasting vibration feedback for alarms and notifications.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours

Leave YourMessage

Thank you! We will reply you via email within 24 hours.

Return